spec no: dsak2861 rev no: v.3 date: jan/05/2011 page: 1 of 7 approved: wynec checked: joe lee drawn: y.h.wu er p: 1311000141 30.48mm(1.2 inch) 16 segment single digit alphanumeric numeric display part number: PSC12-11SURKWA hyper red features z 1.2 inch character height . z low current operation. z high contrast and light output. z easy mounting on p.c. boards or sockets. z categorized for luminous intensity. z mechanically rugged. z standard:gray face, white segment. z rohs compliant. description the hyper red source color devices are made with al- gainp on gaas substrat e light emitting diode. package dimensions& internal circuit diagram notes: 1. all dimensions are in millimeters (inches), tolerance is 0.25(0.01")unless otherwise noted. 2. the specifications, characteristics and technical data descri bed in the datasheet are subject to change without prior notice .
spec no: dsak2861 rev no: v.3 date: jan/05/2011 page: 2 of 7 approved: wynec checked: joe lee drawn: y.h.wu er p: 1311000141 selection guide note: 1. luminous intensity/ luminous flux: +/-15%. absolute maximum ratings at ta=25c electrical / optical characteristics at ta=25c notes: 1.wavelength: +/-1nm. 2. forward voltage: +/-0.1v. notes: 1. 1/10 duty cycle, 0.1ms pulse width. 2. 2mm below package base. part no. dice lens type iv (ucd) [1] @ 10ma min. typ. PSC12-11SURKWA hyper red (algainp) white diffused 31000 63000 common cathode, rt. hand decimal. description symbol parameter device typ. max. units test conditions peak peak wavelength hyper red 650 nm i f =20ma d [1] dominant wavelength hyper red 630 nm i f =20ma ? 1/2 spectral line half-width hyper red 28 nm i f =20ma c capacitance hyper red 35 pf v f =0v;f=1mhz v f [2] forward voltage c,d,g,h,k,m,n,s,r,t hyper red 3.9 5.0 v i f =20ma a,b,e,f,p,u and dp 1.95 2.5 i r reverse current c,d,g,h,k,m,n,s,r,t hyper red 10 ua v r =5v a,b,e,f,p,u and dp 10 parameter super bright red units power dissipation c,d,g,h,k,m,n,s,r,t 150 (75) mw a,b,e,f,p,u and dp dc forward current c,d,g,h,k,m,n,s,r,t 30 (30) ma a,b,e,f,p,u and dp peak forward current [1] c,d,g,h,k,m,n,s,r,t 185 (185) ma a,b,e,f,p,u and dp reverse voltage c,d,g,h,k,m,n,s,r,t v a,b,e,f,p,u and dp operating/storage temperature -40c to +85c lead solder temperature [2] 260c for 3-5 seconds 5
spec no: dsak2861 rev no: v.3 date: jan/05/2011 page: 3 of 7 approved: wynec checked: joe lee drawn: y.h.wu er p: 1311000141 hyper red PSC12-11SURKWA note:the curves are on the segment c,d,g,h,k,m,n,s,r and t.
spec no: dsak2861 rev no: v.3 date: jan/05/2011 page: 4 of 7 approved: wynec checked: joe lee drawn: y.h.wu er p: 1311000141 note:the curves are on the segment a,b,e,f,p,u and dp.
spec no: dsak2861 rev no: v.3 date: jan/05/2011 page: 5 of 7 approved: wynec checked: joe lee drawn: y.h.wu er p: 1311000141 packing & label specifications PSC12-11SURKWA
spec no: dsak2861 rev no: v.3 date: jan/05/2011 page: 6 of 7 approved: wynec checked: joe lee drawn: y.h.wu er p: 1311000141
spec no: dsak2861 rev no: v.3 date: jan/05/2011 page: 7 of 7 approved: wynec checked: joe lee drawn: y.h.wu er p: 1311000141
|
